STL → STEP
For makers, 3D printing and CAD

Convert STL to STEP with real CAD surfaces.

Online STL to STEP converter: upload an STL, check the result in 3D for free, then download an editable STEP solid for Fusion, SolidWorks, FreeCAD or any other CAD.

Drop an STL file here

STL, binary or ASCII · up to 50 MB and 400,000 triangles

Free preview · $2.99 per STEP download

No file at hand?

Before / after

Mesh (STL) CAD faces (STEP)
Drag the slider to compare · drag the part to rotate
Planes Cylinders Cones Spheres Tori (fillets)

How it works

UploadA closed (watertight) mesh, e.g. an STL export from CAD. Holes? Repair the mesh in your slicer first.
Check the previewInspect the detected faces and edges in your browser – free of charge.
Download STEPAs an editable solid (AP214) for any CAD that imports STEP.

Fair and transparent

What the STEP file can do – and what not

What you get

  • A real solid. Measure it, cut it, add holes and fillets, move or delete faces with direct modelling.
  • Round where it was round. A hole becomes one cylinder face, a fillet one torus or cylinder – not a stack of strips.
  • Ready to pass on. Put it in an assembly or send it to a supplier or CAM program that needs STEP.

What no converter can do

  • No feature history. There are no sketches and no dimensions to edit. Change sizes by moving faces instead.
  • No more accurate than the mesh. Radii and positions are fitted to the triangles. Check critical dimensions before tight-tolerance machining.
  • No detail the STL never had. A coarse export stays coarse; thin text and tiny features may stay faceted.
  • No clean surfaces from scans or sculpts. Organic shapes have nothing to fit and stay as many small flat faces.

How to check the result: switch on the measuring tool in the preview and click a hole or fillet. If it was detected, you see one face with its type and radius. If it stayed faceted, it is many narrow flat faces.

Frequently asked questions

Which CAD programs can open the file?

Any program that imports STEP (AP214): Fusion, FreeCAD, Onshape, SolidWorks, Inventor, Creo, Rhino and many more. The faces arrive as real planes, cylinders and cones – you can select them, measure, add holes or fillets.

What if my mesh is not closed?

The conversion needs a watertight mesh. Repair holes and open edges first, e.g. with the repair function of PrusaSlicer, Bambu Studio or Orca, with Meshmixer or with Windows 3D Builder.

Which unit is used?

STL files have no unit. The values are taken as millimetres, as with almost every STL for 3D printing. Check the dimensions in the preview before buying.

What about text, logos and knurling?

Small details are converted too, as long as they consist of planes, cylinders, cones, spheres or fillets. Organic fonts and logos stay faceted. The preview shows exactly what you get.

How fine does the mesh have to be?

The finer the export, the more accurate the radii. Very coarse round surfaces (fewer than about 12 segments around) may stay faceted. Files up to 400,000 triangles are accepted.

Can I change dimensions in the STEP file?

Not by editing a number – the file contains geometry, not a design history. In CAD you can still change it with direct modelling: move or offset faces, delete features, add new ones. For a fully parametric part, rebuild it in CAD and use the STEP as a reference.

How do I know whether a hole was detected?

In the preview the faces are coloured by type (blue = cylinder, orange = cone, green = torus). With the measuring tool, a click on the hole shows its type and radius. After the download: a detected hole is one cylindrical face in your CAD, a faceted one is many narrow strips.